Category
- Protomotive FAQ
- Services
- Accessories
- Engine Building Tools for Porsche
- DIY (Do it yourself)
- Protomotive Merchandise
- Cars for Sale
- 911 Carrera / 930 Turbo (1978-1989)
- 964 Carrera / Carrera 4 (1989-1994)
- 993 Turbo 993 Carrera (1994-1998)
- 996 Turbo / GT2 / GT3-1 / 996 Carrera / 986 Boxster
- 997 Turbo / GT2 / GT2RS / GT3-2 / 997 Carrera / 987 Boxster
- 991 Turbo / GT2RS / GT3-3 / Carrera / Cayman / GT4 / 718 / 981 Boxster
- 992 Turbo Carrera GT3 GT4
- Panamera (970/971)
- Cayenne (955/957/958/9YA)
- Macan (95B/95B-2)
Stroker Rods for Porsche 911 930 964 993 GT3 996 997.1 turbo
$1,890.50
High performance Connecting rods
Stroker Rods for Porsche 911 930 964 993 GT3 996 997.1 turbo
Protomotive Stroker Rods Highlights:
- Protomotive stroker rods are Forged and shot-peened
- They are designed to work with Protomotive Stroker Cranks
- These rods are Available in 125mm center to center for 80.4 Stroker setups which allows you to run OEM configuration compression heights and not be forced into specialty only pistons that may be extremely difficult to install.
What are the advantages of these rods?
- Our stroker rods run the wider bearings from the 996 GT3 crank vs. the narrower 4.0 Gt3 size. We’ve done this for optimal cushioning of the rod bearing to crankshaft with huge torque builds, where the 4.0 GT3’s are for higher rpm, low torque setups.
- Protomotive stroker rods also have a wider small end bushing for more wrist pin support to keep your huge torque from damaging the wrist pin bushings.
- Combined with our 103.6 p/c’s and 23mm DLC coated wrist pins we’ve found incredible strength in this area that’s previously been an issue for big builds.
- Designed specifically for the stroker cranks for oil pump clearance without grinding!
Stretch & Torque Values for ARP2000 3/8″ Bolts
- Using the Stretch method, measure 0.0055 – 0.0060 in. when properly torqued.
- When using a standard torque wrench, tighten to 55 ft-lbs (75 Nm) with ARP Ultra-Torque Fastener Assembly Lubricant
Are there any better rod bolts available?
- Protomotive Rods are supplied with ARP2000 rod bolts for superb rpm capability.
- Otherwise, ARP3.5 HD bolts available on special request at an additional cost. Please contact us for these directly.
- ARP3.5 HD bolts are a very rugged material used in endurance racing mostly. But also applicable to those that want the best there is!
Where can I learn more about Porsches?
- Be sure to check out Protomotive’s YouTube Channel!
Weight | 15 lbs |
---|---|
Dimensions | 12 × 10 × 6 in |
Only logged in customers who have purchased this product may leave a review.
SKU: ProtoRodsV3125mm
Categories: Engine GT3-1, Engine GT3-2, Engine 911 Carrera, Engine 964, Engine 993 Carrera, Engine 993 Turbo, Engine 996 Turbo / X50 / GT2, Engine 997.1 Turbo / GT2RS
Tags: connecting rods, Porsche connecting rods, 911, stroker, Porsche forged rods, 964, forged, porsche, Porsche performance connecting rods, 930, 993, H-Beam 4340 Forged Connecting rods for Porsche, ARP, 996, Forged Connecting rods for Porsche, ARP2000, 997, Protomotive Stroker rods for 80.4 cranks, gt3-1, 997.1, turbo, power, rod, gt3-2, gt3, rods, stroker rods for Porsche, 4340
Reviews
There are no reviews yet.