GEN2 Cable Reading and Flashing Instructions

GEN2 Cable Reading and Flashing Instructions

Tuning with Protomotive?  Here’s the GEN2 Cable Reading and Flashing Instructions to help get started.   These are for the Protomotive 4.0.2.2 Flash client using Gen2 Durametric cables with the  LED under P in Porsche.

How to install the software

1. Download and Install the original ProtoFlashClient4022.exe or ProtoFlashclient41081_GT3Fix_VCI7.zip which has the latest updates, gt3 processor fix, ME7.2 updates etc.
2. If your laptop doesn’t have Microsoft .net 4.0, install this.  Windows 7 and up should already have it. Xp does not, but may have if you run other softwares requiring the .net setup. https://www.protomotive.com/downloads/dotNetFx40_Client_setup.exe

How to run the software (read and flash)

1. After the software has installed, plug in the cable so it recognizes and installs the drivers before running the software.
2. After the drivers have been recognized, plug the cable into the car, key on (not running) click on read.
3. Locate where you’d like to save the file and remember that location (desktop is great)
4. Once done reading, send/email me the VIN.trx file that comes out. VIN will be your actual vin # with the extension .trx.
5. Protomotive will tune your file and return it as a *.ttx file.
6. Open the flash client, while connected to the car with the key on, and click on write.
7. Locate the *.ttx file and it’ll write your file.
8. When all is done, close the software, turn your key off, then back on, then start your car.

Next step is Logging

Need help on a DIY project?  Had another shop tune your car and want help?  We can help with Protomotive Consulting

NOTE:  Pricing for Catalogging purposes only.  This page is purely informational

What cars does this work on?

• 2001-2005 Porsche 996 Turbo
• 2007-2009 Porsche 997.1 Turbo
• 2010-2012 Porsche 997.2 Turbo
• 2012 Porsche GT2RS
• 2004-2011 Porsche GT3
• 2003-2012 Porsche Boxster
• 2006-2012 Porsche Cayman
• Porsche 996 Carrera with ME7.8 DMEs
• Porsche 997 Carrera with ME7.8.1 and SDI3 DMEs
• for ME7.2 DME cars use v4.1.0.1
• If you’re unsure, please contact Protomotive