Protomotive 997TT VGT FenderWell Intake 4in

Protomotive 997TT VGT FenderWell Intake 4in

Designed specifically for 997TTs with oem VGT turbos, while their increasing popularity has had shops installing these in 997.2TT, 991.1TT and 991.2 Turbo!

3D printed in high temp, oil and fuel resistant PA6/9 alloy.   Huge 4″ filters designed for the highest flow.

With a pair of Custom manufactured Green filters, never have an intake restriction issue again.

Supplied with Filters, boots, clamps, inlets and inner fenderwell brackets.

Install time can vary.  Typically 6 hours.

Trimming necessary to route the inlets through the fender liners.  The intercooler bracket also requires clearancing.

This kit is supplied with aluminum inlet adapters for your vgts.  fitting modded vgts as well.  63, 65, 68, 71mm?  All good 🙂

These transition from a 3″ lower  to a 4″ filter.  With clearance provided for the ground strap on 997.1TT drivers side.

Updated tabs for the upper bolt hangers and new fenderwell brackets for a cleaner install!

Although these were made specifically for the 997TT VGT setups, they could be used for k16, k24 and other smaller turbos not requiring the huge 4″ intake.  Even on 996TT!  Recent fitments include 997.2TT, 991.1TT and 991.2TT.  Even working with our GT3071 kit for 997.2T.